A part turning under coolant at Emig Machine & Tool
Turning · Milling · Finished in-house

Services

Production manufacturing and special projects, handled in-house.

CNC Machining

A part turning in the chuck under coolant at Emig Machine & Tool

Turning

The part spins, the tool stays still.

It’s how anything round gets made — shafts, bushings, spacers, flanges, pins, fittings. If a part has an axis and a diameter, it starts on a lathe.

Ours do more than turn. Live tooling, a Y axis and a sub-spindle mean flats, holes and cross-features get cut while the part is still in the chuck. Most jobs go from raw bar to finished part in a single operation — nothing re-fixtured, nothing lost between setups. Larger work runs in the chuck; smaller diameters run bar-fed for volume.

A milling head cutting a part at Emig Machine & Tool

Milling

The tool spins, the part stays still.

It’s how flat and prismatic work gets made — housings, blocks, plates, brackets, manifolds, fixtures. Anything with faces, pockets, bores and bolt patterns that have to line up.

Multi-axis work lets us index a part and cut several faces without tearing down and picking up again. Fewer setups means fewer places for error to creep in. One piece or a production run, cut to your print.

A family of machined steel flanges in graduated sizes

Turning

Shafts, bushings, spacers and flanges turned to size, with milled features cut in the same setup.

Multi-axis millingSub-spindle
14″Max turning diameter
3″Max bar feed diameter
OneOperation from stock to finished part
  • Live tooling, Y axis and sub-spindle. Turned, milled, drilled and parted off in one operation.
  • Complete when it comes off the machine — no second setup, nothing lost re-fixturing.
  • Over 3″ runs in the chuck. Under 3″ runs bar-fed.
  • Built for production volume, not just the first article.
  • Once a part is proven the setup stays with us. The tenth order matches the first.
  • Prototypes, repairs and replacement parts run on the same floor.
Request a quote
A spherical steel part with intersecting angled bores

Milling

Housings, blocks, plates and brackets cut to your print — a single piece or a production run.

4-axisPallet load
XX × XX × XX″Max part size
XX lbMax part weight
OneSetup for multiple faces
  • Send a drawing, a sketch, or a sample part and we will work from that.
  • Multi-axis work, so complex parts stay in one setup.
  • Single pieces through production quantities on the same machines.
  • Repeat orders run from an established setup.
  • Prototype and development work alongside the production side.
  • Replacement parts for equipment that no longer has a supplier.
Request a quote
A section of hex bar, bored and threaded

Sawing

Bar and plate stock cut to length — a finished job, or the first operation before machining.

In-houseBar and plate
XX″Max round capacity
XX × XX″Max rectangular capacity
NoneOutside cuts to wait on
  • Bar and plate stock cut to length.
  • Runs as a finished job, or as the first operation before machining.
  • Material is prepped here, so work starts without waiting on an outside cut.
  • Cut sizes coordinated with the job that follows it.
Request a quote
A machine control on the floor at Emig Machine & Tool

Welding

Welding on parts and assemblies, coordinated with the machining on the same job.

In-houseParts and assemblies
XXProcesses
XX″Max assembly size
OneShop, one schedule
  • Welding on parts and assemblies.
  • Coordinated with the machining on the same job and the same schedule.
  • Cutting, machining and joining never leave the building.
  • No vendor queue between operations.
Request a quote
Stacks of machined rings

Vapor blasting

An even, uniform surface finish. Or take the machined finish straight off the tool.

Vapor blastedMachined finish
TwoFinishes to choose from
XX × XX″Max cabinet size
XXMedia
  • An even, uniform surface finish.
  • Or take the machined finish straight off the tool.
  • Specify the finish with your print, or ask us which suits the part.
  • Finished here, so the part ships from the same floor it was cut on.
Request a quote

From the shop

Parts and machines from the floor at Warminster.

The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool The machine shop floor at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool A machined part made at Emig Machine & Tool